No Products in Your Basket
Buying your first skateboard, or your first proper upgrade, shouldn't mean wading through spec sheets and forum arguments. This guide breaks a skateboard setup down into what it actually is: a deck, trucks, wheels and bearings, working together as one unit. By the end, you'll know whether a complete skateboard or a custom build suits you, what deck size to look at, and why bearings matter more than most guides let on.
We've sold skateboards from Brightley Mill in Okehampton since 2002, and the questions we get on the shop floor and over the phone are always the same: what size, what's included, and what's actually worth paying more for. This guide answers all three.
A complete skateboard is a deck, trucks, wheels, bearings and grip tape, all assembled and ready to ride. For most beginners, this is the easiest and most sensible starting point. You're not guessing which parts work together, and you're not paying for assembly or hunting down separate components. Browse our range of complete skateboards and you'll get a setup that rolls straight out of the box.
Building your own setup makes sense once you know what you like. Maybe you've worn through a deck and want the same shape again, or you've decided you prefer a specific truck brand for stability. Custom builds let you choose every part, but they ask you to already understand deck width, truck sizing and wheel hardness. If you want a bit of both worlds, our custom skateboard builder kits let you pick individual parts while still following a guided structure.
Our honest take: if this is a first skateboard, or you're buying for a child, start with a complete. If you've ridden for a while and know your preferences, building your own is where the real customisation happens.
The deck is the wooden board itself, and it's the part that decides how a skateboard feels underfoot. Three things matter here: width, shape and material.
Width is measured in inches and is the single most useful number when choosing a skateboard deck. As a rough guide:
Wider decks feel more stable underfoot but are heavier and harder to flip. Narrower decks are lighter and easier to ollie, but give you less room for your feet. If you're not sure, 8.0 inch is the sensible middle ground almost every rider can learn on.
Shape affects turning and pop. Most decks use a symmetrical popsicle shape with kicktails at both ends, which suits street skating and general riding. Cruiser shapes are longer and often have a kicktail at one end only, built for rolling rather than tricks.
Material is almost always 7-ply maple for standard decks, which gives a good balance of strength, flex and pop. Blank decks use the same construction without printed graphics, which is a cheaper option if you don't mind a plain finish.
Bearings sit inside each wheel and let it spin freely around the axle. Every skateboard needs eight bearings in total, two per wheel. Fit them badly, or let them wear out, and even the best deck and trucks will feel sluggish.
Most guides fixate on ABEC ratings, a numbering system that measures manufacturing precision. In reality, ABEC ratings say very little about how a bearing performs on a skateboard, because they were designed for industrial machinery, not skate wheels. What actually matters day to day:
If your board feels slow to roll, or you hear a gritty or grinding sound, your skateboard bearings are usually the cause, not the wheels or trucks.
None of these parts perform well in isolation. A skateboard setup is a chain, and each link needs to match the others.
Get one part wrong and the whole board can feel off, even if every individual component is good quality.
Beginners should start with a complete skateboard in a width matched to height, not just shoe size. A complete removes the guesswork and gets you rolling on day one.
Improvers who've ridden for a while will start noticing preferences: maybe a different concave, a different truck feel, or softer wheels for a local spot with rougher ground. This is the point where building or upgrading individual parts starts to make sense.
For parents buying for kids, height matters more than age. Riders under 5ft usually suit a junior complete around 7.25-7.5 inches wide. Riders aged roughly 10-13 who've outgrown a junior board but aren't yet teen-sized often do well on a 7.75 inch complete, light enough to keep learning tricks manageable.
If you're ready to buy, start with our complete skateboards range, filtered by width so you can match a board to height and ability. If you already know your preferred deck shape and want to build your own setup, take a look at skateboard decks, skateboard trucks, skateboard wheels and skateboard bearings individually, or use our custom skateboard builder kits to put a setup together with guided sizing. For step-by-step assembly help once your parts arrive, our how to assemble a skateboard guide covers the full process.
Still not sure what to choose? Call the shop on 01837 55778 or email info@skatewarehouse.co.uk and we'll talk you through it properly.
What's the difference between a complete skateboard and a deck? A complete skateboard includes everything: deck, trucks, wheels, bearings and grip tape, fully assembled and ready to ride. A deck on its own is just the wooden board, and you'll need to buy and fit the other parts separately.
Do I need to buy bearings separately if I buy a complete skateboard? No. A complete skateboard already includes eight bearings, fitted and ready to go. You'd only need to buy bearings separately if you're building your own setup or replacing worn-out ones.
What size skateboard deck should I choose? It depends mainly on height and riding style rather than age alone. Riders under 5ft usually suit 7.25-7.5 inch decks, teens and adult beginners often do well on 8.0 inch, and adults who mainly cruise or skate parks may prefer 8.25-8.5 inch.
Are all skate bearings the same size? Yes. Standard skateboard bearings are all 608 size, so fitment isn't usually a concern. The differences between bearings come down to seal type, build quality and how well they're maintained, not size.
How do I know if my bearings need replacing? If your wheels feel slow to spin, sound gritty or grinding, or don't spin freely when you flip the board over, your bearings likely need cleaning or replacing. Regular cleaning extends bearing life significantly.
Is it cheaper to build a skateboard than buy a complete? Usually not, especially for a first setup. Buying parts individually often costs more than a complete once you add up deck, trucks, wheels, bearings and hardware. complete skateboards are typically better value for beginners, while custom builds make more sense once you have specific preferences worth paying extra for.