100mm Scooter Wheels: A Buyer's Guide

by Jo Gurney on November 06, 2026

Scooter wheels wear out. It's one of the few certainties in stunt scooter riding, along with grazed knees and grip tape that never quite stays clean. When it's time to replace them, 100mm is one of the most common sizes you'll come across, but knowing the number on the wheel doesn't always tell you whether it's the right choice for your scooter or your riding.

This guide covers what 100mm actually means, how it compares to other common sizes, and how to check your scooter is compatible before you order. It also covers wheel hardness, fitting at home, and what to look for if you're buying for a beginner.

What does 100mm mean on a stunt scooter wheel?

100mm refers to the diameter of the wheel, measured straight across the middle. It's one of the most popular sizes for stunt scooters because it strikes a balance between speed, control and weight.

A bigger wheel diameter means more material rolling per rotation, so the scooter covers more ground for the same push. A smaller wheel is lighter and often feels quicker to flick around for tricks. 100mm sits in the middle of that trade-off, which is why it's fitted as standard on a huge range of park and street scooters.

Diameter isn't the only spec that matters. Width counts too, along with the core design (metal or nylon), but diameter is what most riders check first when replacing worn wheels.

100mm vs 110mm vs 120mm: which size is right?

All three sizes turn up on stunt scooters, and the right one depends on how and where you ride.

100mm is the most common size for park and street riding. It's light, responsive, and easy to control in the air and through tricks. Most beginner and intermediate riders get on well with 100mm.

110mm rolls slightly faster and holds momentum better, which some street and park riders prefer once they're pushing for speed between obstacles. The extra size adds a small amount of weight.

120mm is less common on stunt scooters and tends to appear on scooters built more for cruising or covering distance, where rolling speed matters more than flick and control.

For most riders, particularly beginners and anyone doing park or street tricks, 100mm is the safer, more versatile starting point. If you're an experienced rider chasing extra speed and you know your deck and forks can take it, 110mm is worth considering.

How do I know when my scooter wheels need replacing?

Wheels don't need to be bald before they're worth swapping. Look out for:

  • Flat spots: a section of the wheel worn flatter than the rest, usually from skidding or braking. Causes a noticeable bump every rotation.
  • Visible wear down to the core: if you can see the metal or nylon core showing through the polyurethane (PU), the wheel is past its best.
  • Cracking or chunking: small chunks missing from the edge of the wheel, common on cheaper or older wheels.
  • A noticeably slower or rougher ride: worn wheels roll less smoothly, even before they look badly damaged.

Riders who get out a few times a week usually get through a set of wheels every few months. Casual riders can get a year or more from a decent set.

Wheel hardness explained: what PU rating actually means

Scooter wheels are made from polyurethane (PU), and hardness is measured on the durometer scale, shown as a number followed by an A (for example, 88A or 92A).

Lower numbers (softer PU) grip better and absorb more vibration, which can feel more comfortable on rough surfaces. They tend to wear down faster.

Higher numbers (harder PU) roll faster and last longer, since less material is lost to friction. Most stunt scooter wheels sit somewhere between 88A and 92A, which works well for skateparks, smooth street spots and everyday riding.

You don't need to overthink this as a beginner. A mid-range hardness in that 88A-92A window is a sensible, low-risk choice for most riders and most surfaces.

Will 100mm wheels fit my scooter?

Before ordering, check three things:

  1. Deck wheel well size: the deck needs to be designed for 100mm wheels (or wider, with spacers). Fitting a wheel that's too large for the deck cutout will cause rubbing.
  2. Fork clearance: the front fork also needs enough clearance for the wheel diameter you're fitting. Front and back can sometimes differ.
  3. Wheel width and axle compatibility: most stunt scooter wheels use a standard axle size, but width can vary between brands, so check the wheel width matches what your deck and forks are built for.

If your scooter currently runs 100mm wheels and you're simply replacing worn ones, you can go straight for a like-for-like swap. If you're changing size, measure your current wheel well and fork gap first, or check your scooter's spec if you still have it.

Our scooter wheels collection lists sizing clearly on each product, and if you're shopping for a full setup rather than a swap, our stunt scooters range shows what size wheels each scooter comes fitted with.

How to fit new 100mm scooter wheels at home

Changing scooter wheels is a straightforward job for most riders and doesn't need specialist tools.

What you'll need: - An Allen key or scooter tool (size depends on your axle bolts) - Replacement wheels - Your existing bearings, unless they're also worn (check our scooter bearings if they need replacing too)

Basic steps: 1. Turn the scooter upside down or lay it on a stable surface. 2. Remove the axle bolt(s) holding the wheel in place. 3. Slide the old wheel off, keeping the bearings and any spacers safe. 4. Press the bearings into the new wheel (a spare bolt can help push them in evenly). 5. Slide the new wheel back into place, refit the axle bolt, and tighten securely. 6. Spin the wheel to check it rolls freely without rubbing on the deck or forks.

If anything feels stiff, rubs, or doesn't sit flush, double check the wheel size and bearing fit before riding. Our scooter hardware range covers axle bolts and spacers if anything needs replacing during the swap.

Which 100mm wheels should beginners choose?

For most beginners, a mid-hardness 100mm wheel (around 88A-92A) on a metal core is a solid, low-risk choice. Metal cores are generally more durable than nylon and hold up better to regular park and street use.

If you're buying for a child or a newer rider, it's also worth checking the scooter itself is the right fit before worrying about wheel upgrades. Our guide on how to avoid buying the wrong stunt scooter for your child covers deck size, bar height and other basics that matter more than wheel choice at the start. For younger or newer riders specifically, our scooters for kids and juniors collection is a good place to start.

If you're not sure which wheels fit your current setup, check the product listing for compatible deck sizes, or get in touch before you buy.

FAQs

What size wheels do most stunt scooters use? Most stunt scooters come fitted with wheels between 100mm and 120mm. 100mm is the most common size for park and street riding, offering a good balance of control and rolling speed.

Can I fit 100mm wheels on any scooter deck? Not always. The deck's wheel well and fork clearance need to suit a 100mm wheel. If your scooter currently runs 100mm wheels, a like-for-like swap will fit. If you're changing size, check your deck and fork clearance first.

How often should I replace scooter wheels? It depends how often you ride. Regular riders often replace wheels every few months, while casual riders can get a year or more. Replace sooner if you notice flat spots, cracking, or wear down to the core.

Do bigger scooter wheels make you go faster? Generally yes. Larger diameter wheels cover more ground per rotation, so they roll faster and hold momentum better. Smaller wheels are lighter and often easier to control for technical tricks.

What tools do I need to change scooter wheels? Most stunt scooters just need an Allen key or scooter tool to remove the axle bolt. No specialist equipment is required for a standard wheel swap.

Are 100mm wheels good for beginners or more advanced riders? Both. 100mm is popular across all ability levels because it's light, controllable and versatile. It's a sensible default for beginners and remains a common choice for experienced park and street riders too.

If you're ready to replace worn wheels or upgrade your setup, shop scooter wheels for the full range, all listed with clear sizing so you can check compatibility before you order. Check our delivery information for dispatch times on your order.

Related Products...

BACK TO TOP