No Products in Your Basket
These babys feature polished chrome balls, nylon cages 10.3 mm spacers and the very best synthetic bearing grease from Japan. These are not considered "Speed Bearings" but they still get you going plenty fast. It may be a bit counter-intuitive but we've found that this setup is far superior for making sweeping, carvy turns... smoothly and quietly.
We've been using built-in type bearings since 2006... We bought-into the "Sloppy 7" story line which basically asserted that stacking tolerances was bad for speed. And that's still probably true, but Hamboards are about graceful turning not just speed. We have come to suspect that during repeated big heavy turns, like with a Hamboard, the built-in spacer type bearings are so precisely mated that they tend to apply intense side loads to the bearing components and alternatively push-out the inside bearings, eventually loosening both bearings from their snug fit in the wheel hubs.
It makes sense because when any system is loaded, it deflects. It's super hard to see with the naked eye, but it happens. Repeated alternating deflection leads to wear and fatigue. This fatigue eventually results in bearing vibration (noise) and friction (drag). Built-in spacer bearings are awesome for lots of uses... especially for straight-away speed... but maybe not so great for big heavy turning like on a Hamboard or cruiser.
The SAN-O bearing 10.3 mm spacers give extra tolerance gap to help manage the tremendous side load deflections without wearing the bearings guts as much and without pushing-out the inside bearings as much... We think that the result is that SAN-O bearings handle turning better and they stay locked in the plastic wheel hubs better than built-in type bearings.
Grease bearings aren't any where near as commonly available as "Speed Bearings". It's no secret that bearing manufacturers think that consumers assume that "More Speed" is "More Better" all the time. That's definitely true if you're going straight, but not necessarily for a Hamboard that's screaming to turn.
Grease is thicker and more viscous than oil, which sounds like "drag". Engineers know that grease (rather than oil) is a superior lubricant for low and moderate speeds. (There's oil in your car engine that rotates ten-thousands of times a minute, but grease in the entire drive train which rotates hundreds of times a minute.) There are all types of bearing grease out there, but specifically formulated synthetic bearing grease is vastly superior to oil based grease because of the very narrow molecular weight distribution (polymer physics "mumbojumbo"). We've found the bearing grease winner and it's specially formulated for ball bearings. When this grease warms-up just a little bit it gives a buttery carve that really lasts.
Bearings aren't all that expensive, so we might as well use our brains and build the best for Hamboards. That's what SAN-O bearings are... the very best. We hope you like them!
Anyone who's learned to surf in Southern California knows these favorite spots and the irony of surfing warm whitewater from the Nuclear Electric Power Plant sitting right on the beach.
No problem, you are covered by our 100 day returns policy, continue reading to find out more!
We offer a 100 day returns policy from the day you purchased your item. If you?re not 100% happy with your item when you receive it or just changed your mind, follow our simple steps to return it for a refund or exchange it. Once we receive the item you want to exchange, we will send out the new item for free. If you believe the item is faulty then please contact us before sending it. Terms & Conditions apply, read below.
"Can I exchange my item for a different size if it doesn't fit?" - Yes, we are happy to exchange for a different size, make sure you let us know what size you need. Send back the original item with a completed returns form following the steps below. Once we receive your returned item we will send out the new size for free. If the size you need isn't available we will refund you.
"Do you offer free returns?" - No, we do not offer free returns. However, we have partnered with EVRi to offer cost-effective returns, all you have to do is follow the link below.
We have partnered with EVRi to offer you a cost-effective and tracked way to return items. You can choose to drop your parcel at a Parcel Shop, Parcel Locker, or have it picked up. Click the link below and follow the steps to return with EVRi. Prices are subject to change at the discretion of EVRi.
Evri ParcelShop (No Printer, No Problem)
Evri Home Collection (Printer Required)
Once we receive your item we will process your return within 3 working days and then refund or exchange the item as requested.
Any items we receive back to us are subject to the following terms and conditions:
Skatewarehouse LTD will only issue a refund for orders that are returned to us from outside mainland UK. If you would like to exchange the item then we will charge the full shipping cost as per our rates table.
